Shop - Page 37 of 43 - VatsnTecnic

Showing 433–444 of 507 results

Secondhand 8.5 Inch Rubber Extruder Complete Machine

MODEL		Vatsn-1	Vatsn-2	Vatsn-3	Vatsn-4	Vatsn-5	Vatsn-6	Vatsn-8	Vatsn-9
Scroll Size	Inches	2	3	4	4.5	5	6	8	10
Scroll Size	m.m.	50	75	100	115	125	150	200	250
Scroll Speed	RPM	38	38	38	38	38	38	38	38
L/D Ratio		4:1 TO 6:1
Motor	H.P	7.5	10	15	20	25	40	60	100
Reduction Gear Ratio		25:01:00	25:01:00	25:01:00	25:01:00	25:01:00	25:01:00	25:01:00	25:01:00
Feed Roller		Not Available		Optional
Extruder Head		Standard Adaptors other heads as per customer requirement(optional)
Barrel Heating/Cooling		Jacketed type in single zone for efficient heating /cooling
Water Cooling Requirement	LPM	10	15	20	30	40	80	150	180

Secondhand 90 Liter Intermix Rubber Mixer Like New Machine

Model		VAT-45E	VAT-90E	VAT-135E	VAT160E	VAT-190E
Total volume of mixing chamber (L)		45	90	135	160	190
Working volume of mixing chamber (L)		30	56	90	104	125
Speed of rear rotor (r/min)		6-60	5-50	6-60	5-50	6-60
Rotor speed ratio		1:1	1:1	1:1	1:1	1:1
Compressed air pressure (mpa)		0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8
Cooling water pressure (mpa)		0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4
Main motor power (kw)		280	450	720	750	1100
Overall dimension (mm)	(L)	6200	7400	8200	8600	9000
	(W)	2500	2880	2950	3000	4000
	(H)	3750	4700	5375	6000	6220
Weight (T)		15	23	29	39	45

Secondhand Auto Motorcycle Tire Building Machine15-19 Inch

Model / Specification	PR2-1215	MC2-1519
Applicable Tyre	PCR (steel, fabric)	MC (fabric)
Bead Diameter	12" ~ 15"	15" ~ 19" s
Belt Drum Dia	Ø445.6 ~ Ø 573	Ø525 ~ Ø 652.5
Belt Drum Dia	Ø573 ~ Ø700	Ø652.5 ~ Ø779.8
Transfer Ring Inner Dia. Range	Ø450 ~ Ø 700	Ø525 ~ Ø 870
Belt Drum Width	300mm	300mm
Height of Drum center above Floor	1060mm	1060mm
Width of Transfer Ring Segment	200mm	200mm
Shaping Drum Range	Min190 ~ MAX560mm (Shaping Drum)	Min190 ~ MAX560mm (Shaping Drum)
Shaping Drum Range	Min100 ~ MAX560mm (Shoulder Ring)	Min100 ~ MAX560mm (Shoulder Ring)
Feeding Mechanism	Cart Type / Hanging Type	Cart Type / Hanging Type
Width of JLB (slit cap ply)	8mm to 12mm	8mm to 12mm
Tread Width Range	300mm	300mm
Tread Length MAX.	2500mm	2500mm
Electronic Control System	Servo motor CONTROL Manual / Auto	Servo motor CONTROL Manual / Auto
Building rate (approximate)	90 sec / pc	90 sec / pc

Secondhand Conveyor Belt Hydraulic Press 2.18 x 10 Meter

Parameter	unit	VAT-1800X12000*2	VAT-1800X10000*2	VAT-1600X10000*2	VAT-1600X10000*1	VAT-1400X10000*1
Hot-plate size	mm	1800*12000	1800*1000	1600*10000	1600*10000	1400*10000
Total pressure	mn	74	72	56	64	49
Hot-plate unit pressure	mpa	3.4	4	3.5	4	3.5
Plunger diameter	mm	500	500	450	500	450
Plunger No		18	18	18	18	18
Max plunger stroke	mm	400	300	400	300	300
Gripping strength	mn	1.2	1.5	1.2	1.2	0.9
Tension force	mn	1.101.2	1.1	1	0.5	0.9
Steam pressure	mpa	0.63	0.6-0.8	0.63	0.6-0.8	0.63
Cooling water pressure	mpa	0.3	0.3	0.3	0.3	0.3
controlling method		PLC	PLC	PLC	PLC	PLC

Secondhand Hydraulic Molding Press for EVA Block – 36×42

Type	VAT-D780*600	VAT-D800*1000	VAT-D900*1100	VAT-D1000*1200	VAT-D1350*1500
Total pressure (T)	160	250	300	500	1000
Plate size (mm)	780*600	800*1000	900*1100	1000*1200	1350*1500
Plate clearance (mm)	200	140	150	150	150
Layer number	2	4	4	4	6
Motor power (kw)	5.5	7.5	7.5	11	22

Secondhand Old Rubber Refiner with Bushes & 100HP Gearbox

Working diameter of rolls(mm)	φ400front roller φ480rear roller	φ450front roller φ510rear roller	φ480front roller φ610rear roller
Roll casting process	centrifugal composite casting	centrifugal composite casting	centrifugal composite casting
Roll cooling mode	Around the borehole cooling	Around the borehole cooling	Around the borehole cooling
The surface of the roll material	High nickel chromium molybdenum alloy	High nickel chromium molybdenum alloy	High nickel chromium molybdenum alloy
Working length of the roll(mm)	650	800/1000	800/1000/1200
After the roller line speed(m/min)	32.94(optional)	49/55.2/63.4(optional)	57.5-75.1(optional)
Front and rear roller line speed ratio	1.27-1.815(optional)	1.38/1.82/2(optional)	1.27-1.815(optional)
Production capacity(kg/h)	300	360	500-800
Motor power(kw)	55	55	75/90
Roller spacing adjustment range(mm)	0.1-15	0.1-15	0.1-15
Reducer	ZSY hard-tooth face gear	ZSY hard-tooth face gear	ZSY hard-tooth face gear
Bearing type	the double spherical roller bearing	the double spherical roller bearing	the double spherical roller bearing
Dimensions of LxWxH(mm)	4750x2300x1835	4060x2200x1470	5070x2800x1978
Quality(kg）	about 10500	about 12800	about 20000

Secondhand Rubber Cracker Mill 18x18x24 for Sale

Model		VAT-360	VAT-400	VAT-450	VAT-550	VAT-560	VAT-660	VAT-710
Diameter of rolls(mm)		360	400	450	550	560-510	660	710
Working length of rolls(mm)		900	1000	1200	1500	1530	2130	2200
Linear speed of front roll(r/min)		16.25	18.65	21.8	22.5	27.2	28	31.9
Speed ratio of front & rear roll		01:01.3	01:01.3	01:01.3	01:01.2	01:01.2	01:01.2	01:01.5
Max roll gap(mm)		10	10	15	16	15	15	15
Feeding capacity per batch(kg)		20-25	18-35	50	50-65	50-65	165	190
Driving motor power(kw)		30	45	55	110	90	240	280
Bearing body structure		Roller bearing with grease/thin oil lubrication+square type reducer
Overall dimension(mm)	L	4200	4920	5405	6646	6270	7280	8185
	W	1780	1780	1740	2736	2282	3400	3910
	H	1760	1800	1790	2105	2000	2530	2270
Weight(ton)		6.5	7.5	12	22	22.5	49	51

Secondhand Rubber Dispersion Kneader 35 Ltr | Make: Manjeet

Model		VAT-3/40	VAT-10/40	VAT-20/40	VAT-35/30	VAT-55/30	VAT-75/30	VAT-110/30
Total volume of mixing chamber (L)		8	25	45	75	125	170	250
Working volume of mixing chamber (L)		3	10	20	35	55	75	110
Speed of rotor (front/rear) (r/min)		40/31	40/31	40/31	30/24.5	30/24.5	30/24.5	30/25
Compressed air pressure (mpa)		0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8
Cooling water pressure (mpa)		0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4
Main motor power (kw)		7.5	22	37	55	75	110	185
Turning motor power (kw)		0.55	1.1	1.5	1.5	2.2	4	4
Turning angle (°)		140	140	140	140	140	140	140
Overall dimension (mm)	(L)	1670	2300	2360	3240	3400	3860	4225
	(W)	950	1350	1750	2080	2300	2300	1980
	(H)	1880	2120	2430	2650	3100	3375	3180
Weight (T)		1.2	2.3	4.5	6.5	7.5	10	11

Secondhand Rubber Extruder Imported 75 mm

MODEL		Vatsn-1	Vatsn-2	Vatsn-3	Vatsn-4	Vatsn-5	Vatsn-6	Vatsn-8	Vatsn-9
Scroll Size	Inches	2	3	4	4.5	5	6	8	10
Scroll Size	m.m.	50	75	100	115	125	150	200	250
Scroll Speed	RPM	38	38	38	38	38	38	38	38
L/D Ratio		4:1 TO 6:1
Motor	H.P	7.5	10	15	20	25	40	60	100
Reduction Gear Ratio		25:01:00	25:01:00	25:01:00	25:01:00	25:01:00	25:01:00	25:01:00	25:01:00
Feed Roller		Not Available		Optional
Extruder Head		Standard Adaptors other heads as per customer requirement(optional)
Barrel Heating/Cooling		Jacketed type in single zone for efficient heating /cooling
Water Cooling Requirement	LPM	10	15	20	30	40	80	150	180

Secondhand Rubber Hose Manufacturing Machines

Rubber Hose Manufacturing Machines are very significant in producing quality rubber hoses that the automobile industry, construction industries, etc require.

Secondhand Rubber Mixing Mill 10X24

Model		VAT-250	VAT-300	VAT-360	VAT-400	VAT-450	VAT-550	VAT-560	VAT-610	VAT-660	VAT-660(R)	VAT-710	VAT-760	VAT-810
Diameter of rolls(mm)		250	300	360	400	450	550	560	610	660	660	710	760	810
Working length of rolls(mm)		620	760	900	1000	1200	1530	1530	1830	2130	2130	2200	2540	2540
Linear speed of front roll(m/min)		15.2	14.5	16.26	18.65	23.85	27.18	27.61	28.7	32.45	28.6	31.9	33.23	31.9
Roll Friction Ratio		1:1.10	1:1.10	1:1.25	1:1.27	1:1.27	1:1.25	1:1.25	1:1.25	1:1.09	1:1.24	1:1.09	1:1.09	1:1.09
Batch Capacity		10-15	14-16	15-20	25-35	30-50	50-60	50-60	90-120	165	165	350	350	350
Motor Power		18.5	22	30	40	55	110	110	160	185	250	280	315	355
Max. Nip(mm)		8	8	10	10	10	15	15	15	15	15	15	15	15
Overall dimension(mm)	L	3220	3570	3920	4380	5050	6040	6040	6750	7040	7465	7650	8560	8680
	W	1500	1400	1650	1710	1920	2100	2100	3040	3660	3660	3200	2970	3575
	H	1290	1350	1725	1880	1870	1625	1625	1743	2080	2080	2860	1970	3020
Weight(ton)		3.8	4.5	6	8	13	22	22	35	45	45	50	58	68