Rubber Hot Feed Extruder
Rubber Cold Feed Extruder
Rubber Strainer – Reclaim Extruder
Reclaim Rotary Autoclave
Compression Molding
Injection Molding
Vacuum Molding
Rubber EVA Refiner Mill
Rubber Pre-Refiner Mill
Tire Building Machine
Tread & sidewall Extruder
Tread Cooling skiver
Tire curing press
BELT JOINTING PRESS
Belt Building Machine
Eva Footwear Injection Molding Machines
Hawaii Slipper Sole Sheet Machine
Eva Sole Sheet Splitting
Eva Sheeting Wheels 5/7/9
PVC Flooring Machine
Plastic Pelletizing Line
Filler / Masterbatch / PVC / TPR / EVA
Breaker – Cracker Mill
Shredder – Rasper Machines
Waste Rubber Crumb Grinder MillShop
Secondhand 25L Rubber Kneader – 40 HP Motor Unit
| Model | VAT-3/40 | VAT-10/40 | VAT-20/40 | VAT-35/30 | VAT-55/30 | VAT-75/30 | VAT-110/30 | |
| Total volume of mixing chamber (L) | 8 | 25 | 45 | 75 | 125 | 170 | 250 | |
| Working volume of mixing chamber (L) | 3 | 10 | 20 | 35 | 55 | 75 | 110 | |
| Speed of rotor (front/rear) (r/min) | 40/31 | 40/31 | 40/31 | 30/24.5 | 30/24.5 | 30/24.5 | 30/25 | |
| Compressed air pressure (mpa) | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | |
| Cooling water pressure (mpa) | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | |
| Main motor power (kw) | 7.5 | 22 | 37 | 55 | 75 | 110 | 185 | |
| Turning motor power (kw) | 0.55 | 1.1 | 1.5 | 1.5 | 2.2 | 4 | 4 | |
| Turning angle (°) | 140 | 140 | 140 | 140 | 140 | 140 | 140 | |
Overall dimension (mm) | (L) | 1670 | 2300 | 2360 | 3240 | 3400 | 3860 | 4225 |
| (W) | 950 | 1350 | 1750 | 2080 | 2300 | 2300 | 1980 | |
| (H) | 1880 | 2120 | 2430 | 2650 | 3100 | 3375 | 3180 | |
| Weight (T) | 1.2 | 2.3 | 4.5 | 6.5 | 7.5 | 10 | 11 | |
Secondhand 30rpm 75KG/H Two-Wing Rotor Rubber Kneader Machine
| Model | VAT-3/40 | VAT-10/40 | VAT-20/40 | VAT-35/30 | VAT-55/30 | VAT-75/30 | VAT-110/30 | |
| Total volume of mixing chamber (L) | 8 | 25 | 45 | 75 | 125 | 170 | 250 | |
| Working volume of mixing chamber (L) | 3 | 10 | 20 | 35 | 55 | 75 | 110 | |
| Speed of rotor (front/rear) (r/min) | 40/31 | 40/31 | 40/31 | 30/24.5 | 30/24.5 | 30/24.5 | 30/25 | |
| Compressed air pressure (mpa) | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | |
| Cooling water pressure (mpa) | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | |
| Main motor power (kw) | 7.5 | 22 | 37 | 55 | 75 | 110 | 185 | |
| Turning motor power (kw) | 0.55 | 1.1 | 1.5 | 1.5 | 2.2 | 4 | 4 | |
| Turning angle (°) | 140 | 140 | 140 | 140 | 140 | 140 | 140 | |
Overall dimension (mm) | (L) | 1670 | 2300 | 2360 | 3240 | 3400 | 3860 | 4225 |
| (W) | 950 | 1350 | 1750 | 2080 | 2300 | 2300 | 1980 | |
| (H) | 1880 | 2120 | 2430 | 2650 | 3100 | 3375 | 3180 | |
| Weight (T) | 1.2 | 2.3 | 4.5 | 6.5 | 7.5 | 10 | 11 | |
Secondhand 32rpm 75L EPDM Rubber Kneader Machine with Motor Drive
| Model | VAT-3/40 | VAT-10/40 | VAT-20/40 | VAT-35/30 | VAT-55/30 | VAT-75/30 | VAT-110/30 | |
| Total volume of mixing chamber (L) | 8 | 25 | 45 | 75 | 125 | 170 | 250 | |
| Working volume of mixing chamber (L) | 3 | 10 | 20 | 35 | 55 | 75 | 110 | |
| Speed of rotor (front/rear) (r/min) | 40/31 | 40/31 | 40/31 | 30/24.5 | 30/24.5 | 30/24.5 | 30/25 | |
| Compressed air pressure (mpa) | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | |
| Cooling water pressure (mpa) | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | |
| Main motor power (kw) | 7.5 | 22 | 37 | 55 | 75 | 110 | 185 | |
| Turning motor power (kw) | 0.55 | 1.1 | 1.5 | 1.5 | 2.2 | 4 | 4 | |
| Turning angle (°) | 140 | 140 | 140 | 140 | 140 | 140 | 140 | |
Overall dimension (mm) | (L) | 1670 | 2300 | 2360 | 3240 | 3400 | 3860 | 4225 |
| (W) | 950 | 1350 | 1750 | 2080 | 2300 | 2300 | 1980 | |
| (H) | 1880 | 2120 | 2430 | 2650 | 3100 | 3375 | 3180 | |
| Weight (T) | 1.2 | 2.3 | 4.5 | 6.5 | 7.5 | 10 | 11 | |
Secondhand 35L Rubber Kneader – Affordable & High-Quality
| Model | VAT-3/40 | VAT-10/40 | VAT-20/40 | VAT-35/30 | VAT-55/30 | VAT-75/30 | VAT-110/30 | |
| Total volume of mixing chamber (L) | 8 | 25 | 45 | 75 | 125 | 170 | 250 | |
| Working volume of mixing chamber (L) | 3 | 10 | 20 | 35 | 55 | 75 | 110 | |
| Speed of rotor (front/rear) (r/min) | 40/31 | 40/31 | 40/31 | 30/24.5 | 30/24.5 | 30/24.5 | 30/25 | |
| Compressed air pressure (mpa) | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | |
| Cooling water pressure (mpa) | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | |
| Main motor power (kw) | 7.5 | 22 | 37 | 55 | 75 | 110 | 185 | |
| Turning motor power (kw) | 0.55 | 1.1 | 1.5 | 1.5 | 2.2 | 4 | 4 | |
| Turning angle (°) | 140 | 140 | 140 | 140 | 140 | 140 | 140 | |
Overall dimension (mm) | (L) | 1670 | 2300 | 2360 | 3240 | 3400 | 3860 | 4225 |
| (W) | 950 | 1350 | 1750 | 2080 | 2300 | 2300 | 1980 | |
| (H) | 1880 | 2120 | 2430 | 2650 | 3100 | 3375 | 3180 | |
| Weight (T) | 1.2 | 2.3 | 4.5 | 6.5 | 7.5 | 10 | 11 | |
Secondhand 4 Roll Rubber Calender Machine | Size 28×72 | Vatsn Tecnic
| Parameter/model | VAT-4-230 | VAT-4-360 | VAT-4-400 | VAT-4-450 | VAT-4-550 | VAT-4-610 | VAT-4-810 | ||
| Roll diameter (mm) | 230 | 360 | 400 | 450 | 550 | 610 | 810 | ||
| Roll working length (mm) | 630 | 1120 | 1200 | 1400 | 1500 | 1730 | 2500 | ||
| Ratio of rubber speed | 1:1:1:1 | 0.7:1:1:0.7 | 1:1.4:1.4:1 | 1:1.5:1.5:1 | 1:1.5:1.5:1 | 1:1.4:1.4:1 | 1:1.4:1.4:1 | ||
| Roll speed (m/min) | 2.1-21 | 2-20.1 | 3-26 | 2.5-25 | 3-30 | 8-50 | 4-40 | ||
| Nip adjust range (mm) | 0-10 | 0-10 | 0-10 | 0-10 | 0-15 | 0-10 | 0-10 | ||
| Motor power (KW) | 15 | 55 | 75 | 110 | 160 | 185 | 132x4 | ||
| Size (mm) | Length | 2800 | 3300 | 6400 | 6620 | 7550 | 7880 | 11400 | |
| Width | 930 | 1040 | 1620 | 1970 | 2400 | 2560 | 3900 | ||
| Height | 1890 | 2350 | 2490 | 2740 | 3400 | 3920 | 5140 | ||
| Weight (KG) | 5000 | 16000 | 20000 | 23000 | 45000 | 50000 | 130000 | ||
Secondhand 4.5-inch Hot Feed Rubber Extruder with 30 HP
| MODEL | Vatsn-1 | Vatsn-2 | Vatsn-3 | Vatsn-4 | Vatsn-5 | Vatsn-6 | Vatsn-8 | Vatsn-9 | ||
Scroll Size | Inches | 2 | 3 | 4 | 4.5 | 5 | 6 | 8 | 10 | |
| m.m. | 50 | 75 | 100 | 115 | 125 | 150 | 200 | 250 | ||
| Scroll Speed | RPM | 38 | 38 | 38 | 38 | 38 | 38 | 38 | 38 | |
| L/D Ratio | 4:1 TO 6:1 | |||||||||
| Motor | H.P | 7.5 | 10 | 15 | 20 | 25 | 40 | 60 | 100 | |
| Reduction Gear Ratio | 25:01:00 | 25:01:00 | 25:01:00 | 25:01:00 | 25:01:00 | 25:01:00 | 25:01:00 | 25:01:00 | ||
| Feed Roller | Not Available | Optional | ||||||||
| Extruder Head | Standard Adaptors other heads as per customer requirement(optional) | |||||||||
| Barrel Heating/Cooling | Jacketed type in single zone for efficient heating /cooling | |||||||||
| Water Cooling Requirement | LPM | 10 | 15 | 20 | 30 | 40 | 80 | 150 | 180 | |
Secondhand 500 Ton Big Size Hydraulic Press – Machine Specifications:
="1" cellspacing="0" cellpadding="0" data-sheets-root="1" data-sheets-baot="1">
| MODEL NO. | VAT-75 | VAT-100 | VAT-150 | VAT-200 | VAT-250 | VAT-300 | VAT-350 | VAT-400 | VAT-500 |
| PLATEN SIZE (MM) | 360x360 | 410x410 | 460x460 | 510x510 | 610x610 | 660x660 | 760x760 | 800x850 | 1000x1000 |
| MACHINE TONNAGE | 75 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 500 |
| RAM SIZE DIA (MM) | 220 MM | 250 MM | 300 MM | 350 MM | 400 MM | 450 MM | 500 MM | 550 MM | 600 MM |
| DAYLITE GAP | 500 MM | 500 MM | 500 MM | 400-500 MM | 400-500 MM | 400-500 MM | 400-500 MM | 500-800 MM | 500-900 MM |
| MAN MOTOR | 5 HP | 5 HP | 5 HP | 7.5 HP | 10 HP | 10 HP | 15 HP | 15 HP | 20 HP |
| MAIN RAM STROKE | 500 MM | 500 MM | 500 MM | 500 MM | 500 MM | 500 MM | 500 MM | 500 MM | 500 MM |
Secondhand 6 Inch Hot Feed Rubber Extrusion Machine – Heavy Duty | Good Condition |
| hot feed | ||||||||||
| MODEL | Vatsn-1 | Vatsn-2 | Vatsn-3 | Vatsn-4 | Vatsn-5 | Vatsn-6 | Vatsn-8 | Vatsn-9 | ||
Scroll Size | Inches | 2 | 3 | 4 | 4.5 | 5 | 6 | 8 | 10 | |
| m.m. | 50 | 75 | 100 | 115 | 125 | 150 | 200 | 250 | ||
| Scroll Speed | RPM | 38 | 38 | 38 | 38 | 38 | 38 | 38 | 38 | |
| L/D Ratio | 4:1 TO 6:1 | |||||||||
| Motor | H.P | 7.5 | 10 | 15 | 20 | 25 | 40 | 60 | 100 | |
| Reduction Gear Ratio | 25:01:00 | 25:01:00 | 25:01:00 | 25:01:00 | 25:01:00 | 25:01:00 | 25:01:00 | 25:01:00 | ||
| Feed Roller | Not Available | Optional | ||||||||
| Extruder Head | Standard Adaptors other heads as per customer requirement(optional) | |||||||||
| Barrel Heating/Cooling | Jacketed type in single zone for efficient heating /cooling | |||||||||
| Water Cooling Requirement | LPM | 10 | 15 | 20 | 30 | 40 | 80 | 150 | 180 | |