Shop - Page 29 of 48 - VatsnTecnic

Showing 337–348 of 566 results

Show sidebar

Show 9 24 36

-9%

Used 1550mm rubber rotocure machine for sale at best price

Rubber rotocure vulcanizing machine with 1550mm wide belt for sheet curing

Add to compare

Old Stock Rubber Rotocure Vulcanizing Machine 1550mm

Key Specifications

Machine Type: Rubber Rotocure Vulcanizing Machine (Old Stock)
Belt Width: 1550 mm
Belt Type: Endless heat-resistant synthetic belt
Heating System: Steam / Electrical (depending on setup)
Working Pressure: Adjustable for uniform vulcanization
Temperature Range: 0°C – 250°C (approx., depending on model)
Control System: Automatic temperature & pressure control
Applications: Conveyor belts, rubber sheets, flooring mats, industrial rubber products
Condition: Old stock, fully tested and ready for operation

Plus One Machine Fabrik (Belgaum) – Fully Automatic Hydraulic Press

MODEL NO.	VAT-75	VAT-100	VAT-150	VAT-200	VAT-250	VAT-300	VAT-350	VAT-400	VAT-500
PLATEN SIZE (MM)	360x360	410x410	460x460	510x510	610x610	660x660	760x760	800x850	1000x1000
MACHINE TONNAGE	75	100	150	200	250	300	350	400	500
RAM SIZE DIA (MM)	220 MM	250 MM	300 MM	350 MM	400 MM	450 MM	500 MM	550 MM	600 MM
DAYLITE GAP	500 MM	500 MM	500 MM	400-500 MM	400-500 MM	400-500 MM	400-500 MM	500-800 MM	500-900 MM
MAN MOTOR	5 HP	5 HP	5 HP	7.5 HP	10 HP	10 HP	15 HP	15 HP	20 HP
MAIN RAM STROKE	500 MM	500 MM	500 MM	500 MM	500 MM	500 MM	500 MM	500 MM	500 MM

Pre Owned Rubber Mixing Mill 8 Inch x 18 Inch Available Now

Model		VAT-250	VAT-300	VAT-360	VAT-400	VAT-450	VAT-550	VAT-610	VAT-660	VAT-660(R)	VAT-710	VAT-760	VAT-810
Diameter of rolls(mm)		250	300	360	400	450	550	610	660	660	710	760	810
Working length of rolls(mm)		620	760	900	1000	1200	1530	1830	2130	2130	2200	2540	2540
Linear speed of front roll(m/min)		15.2	14.5	16.26	18.65	23.85	27.18	28.7	32.45	28.6	31.9	33.23	31.9
Roll Friction Ratio		1:1.10	1:1.10	1:1.25	1:1.27	1:1.27	1:1.25	1:1.25	1:1.09	1:1.24	1:1.09	1:1.09	1:1.09
Batch Capacity		10-15	14-16	15-20	25-35	30-50	50-60	90-120	165	165	350	350	350
Motor Power		18.5	22	30	40	55	110	160	185	250	280	315	355
Max. Nip(mm)		8	8	10	10	10	15	15	15	15	15	15	15
Overall dimension(mm)	L	3220	3570	3920	4380	5050	6040	6750	7040	7465	7650	8560	8680
	W	1500	1400	1650	1710	1920	2100	3040	3660	3660	3200	2970	3575
	H	1290	1350	1725	1880	1870	1625	1743	2080	2080	2860	1970	3020
Weight(ton)		3.8	4.5	6	8	13	22	35	45	45	50	58	68

Pre-Owned 115 Ltr Rubber Kneader | Modern | 125 HP ABB Motor

r="1" cellspacing="0" cellpadding="0" data-sheets-root="1" data-sheets-baot="1"><colgroup>width="100" />"100" />170<td>250</tr> power (kw)0.551.11.51.52.244

Model		VAT-3/40	VAT-10/40	VAT-20/40	VAT-35/30	VAT-55/30	VAT-75/30	VAT-110/30
Total volume of mixing chamber (L)		8	25	45	75	125	Working volume of mixing chamber (L)		3	10	20	35	55	75	110
Speed of rotor (front/rear) (r/min)		40/31	40/31	40/31	30/24.5	30/24.5	30/24.5	30/25
Compressed air pressure (mpa)		0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8
Cooling water pressure (mpa)		0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4
Main motor power (kw)		7.5	22	37	55	75	110	185
span="1">Turning motor
Turning angle (°)		140	140	140	140	140	140	140
Overall dimension (mm)	(L)	1670	2300	2360	3240	3400	3860	4225
	(W)	950	1350	1750	2080	2300	2300	1980
	(H)	1880	2120	2430	2650	3100	3375	3180
Weight (T)		1.2	2.3	4.5	6.5	7.5	10	11

Pre-owned 150-Pin Cold Feed Extruder With Panel & TCU

Model		VAT- 90 X 14D	VAT- 120 X 14D	VAT- 150 X 16D	VAT- 200 X 12D	VAT- 200 X 16D	VAT- 250 X 12D	VAT- 250 X 16D
Screw diameter (mm)		90	120	150	200	200	250	250
Screw L/ D ratio		14/1	14/1	16/1	16/1	16/1	16/1	16/1
Max.Screw Speed (r/min)		60	50	43	33	33	26	26
Feeding hole size (mm)		120×80	160×110	200×165	260×152	260×152	340×190	340×190
Row quantity of pin		8	10	10	8	12	10	12
Pin quantity of each row		6	6	8	10	10	12	12
Motor model (kw)		Z4-180-41	Z4-225-11	Z4-250-11	Z4-280-32	Z4-315-12	Z4-315-42	Z4-355-12
Main motor Power (kw)		55	110	220	315	355	400	450
Hot water circulation section		3	3	4	4	4	4	4
Total power of hot water circulating heating (kw)		32	32	42	42	54	48	54
Max.Production capacity (kg/h)		360	800	1500	2600	2600	3600	3600
Overall dimension(mm)	(L)	2300	3250	3800	5030	5900	5400	6077
	(W)	1060	1250	1590	1950	1950	2400	2400
	(H)	1450	1650	1700	1850	1850	1920	1920
Weight (t)		3.2	5.7	7.2	15	15	18	21

Pre-Owned 24×24 Rubber Moulding Press, 16-Inch Piston

MODEL NO.	VAT-75	VAT-100	VAT-150	VAT-200	VAT-250	VAT-300	VAT-350	VAT-400	VAT-500
PLATEN SIZE (MM)	360x360	410x410	460x460	510x510	610x610	660x660	760x760	800x850	1000x1000
MACHINE TONNAGE	75	100	150	200	250	300	350	400	500
RAM SIZE DIA (MM)	220 MM	250 MM	300 MM	350 MM	400 MM	450 MM	500 MM	550 MM	600 MM
DAYLITE GAP	500 MM	500 MM	500 MM	400-500 MM	400-500 MM	400-500 MM	400-500 MM	500-800 MM	500-900 MM
MAN MOTOR	5 HP	5 HP	5 HP	7.5 HP	10 HP	10 HP	15 HP	15 HP	20 HP
MAIN RAM STROKE	500 MM	500 MM	500 MM	500 MM	500 MM	500 MM	500 MM	500 MM	500 MM

Pre-Owned 270L Rubber Banbury Mixer Set for Sale | High-Capacity Kneader Machine

Model		VAT-45E	VAT-90E	VAT-135E	VAT160E	VAT-190E
Total volume of mixing chamber (L)		45	90	135	160	190
Working volume of mixing chamber (L)		30	56	90	104	125
Speed of rear rotor (r/min)		6-60	5-50	6-60	5-50	6-60
Rotor speed ratio		1:1	1:1	1:1	1:1	1:1
Compressed air pressure (mpa)		0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8
Cooling water pressure (mpa)		0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4
Main motor power (kw)		280	450	720	750	1100
Overall dimension (mm)	(L)	6200	7400	8200	8600	9000
	(W)	2500	2880	2950	3000	4000
	(H)	3750	4700	5375	6000	6220
Weight (T)		15	23	29	39	45

Pre-Owned 3-Roll Rubber Calender Machine 560 x 1680 mm Rubber Sheeting

Parameter/model		VAT-3-250	VAT-3-360	VAT-3-400	VAT-3-450	VAT-3-560	VAT-3-610	VAT-3-810
Roll diameter (mm)		250	360	400	450	560	610	810
Roll working length (mm)		720	1120	1200	1400	1650	1730	2130
Ratio of rubber speed		1:1	1:1	1:1	1:1.5:1	1:1.5:1	1:1.4:1	1:01:01
Roll speed (m/min)		2-15.9	3-20	3-26	2.6-26.2	3-30	5.4-54	3-30
Nip adjust range (mm)		0-6	0-10	0-10	0-10	0-15	0.5-25	0.2-25
Motor power (KW)		22	45	55	75	110	160	132x3
Size (mm)	Length	3950	5400	5600	7013	7200	7987	8690
Width		1110	1542	1400	1595	1760	1860	3139
Height		1810	2440	2520	2900	3800	3950	5050
Weight (KG)		5500	14000	18000	21000	35000	42000	110000

Pre-Owned 4 Roll Calender Machine (660 x 2650 mm)

Parameter/model		VAT-4-230	VAT-4-360	VAT-4-400	VAT-4-450	VAT-4-550	VAT-4-610	VAT-4-810
Roll diameter (mm)		230	360	400	450	550	610	810
Roll working length (mm)		630	1120	1200	1400	1500	1730	2500
Ratio of rubber speed		1:1:1:1	0.7:1:1:0.7	1:1.4:1.4:1	1:1.5:1.5:1	1:1.5:1.5:1	1:1.4:1.4:1	1:1.4:1.4:1
Roll speed (m/min)		2.1-21	2-20.1	3-26	2.5-25	3-30	8-50	4-40
Nip adjust range (mm)		0-10	0-10	0-10	0-10	0-15	0-10	0-10
Motor power (KW)		15	55	75	110	160	185	132x4
Size (mm)	Length	2800	3300	6400	6620	7550	7880	11400
Width		930	1040	1620	1970	2400	2560	3900
Height		1890	2350	2490	2740	3400	3920	5140
Weight (KG)		5000	16000	20000	23000	45000	50000	130000

Pre-Owned 4-Roll Calender Machine 2600mm x 660mm – Double Elephant Make

r="1" cellspacing="0" cellpadding="0" data-sheets-root="1" data-sheets-baot="1">


Parameter/model		VAT-4-230	VAT-4-360	VAT-4-400	VAT-4-450	VAT-4-550	VAT-4-610	VAT-4-810
Roll diameter (mm)		230	360	400	450	550	610	810
Roll working length (mm)		630	1120	1200	1400	1500	1730	2500
Ratio of rubber speed		1:1:1:1	0.7:1:1:0.7	1:1.4:1.4:1	1:1.5:1.5:1	1:1.5:1.5:1	1:1.4:1.4:1	1:1.4:1.4:1
Roll speed (m/min)		2.1-21	2-20.1	3-26	2.5-25	3-30	8-50	4-40
Nip adjust range (mm)		0-10	0-10	0-10	0-10	0-15	0-10	0-10
Motor power (KW)		15	55	75	110	160	185	132x4
Size (mm)	Length	2800	3300	6400	6620	7550	7880	11400
Width		930	1040	1620	1970	2400	2560	3900
Height		1890	2350	2490	2740	3400	3920	5140
Weight (KG)		5000	16000	20000	23000	45000	50000	130000

Pre-Owned 400×1000 Rubber Mixing Mill – Excellent Condition

Model		VAT-250	VAT-300	VAT-360	VAT-400	VAT-450	VAT-550	VAT-610	VAT-660	VAT-660(R)	VAT-710	VAT-760	VAT-810
Diameter of rolls(mm)		250	300	360	400	450	550	610	660	660	710	760	810
Working length of rolls(mm)		620	760	900	1000	1200	1530	1830	2130	2130	2200	2540	2540
Linear speed of front roll(m/min)		15.2	14.5	16.26	18.65	23.85	27.18	28.7	32.45	28.6	31.9	33.23	31.9
Roll Friction Ratio		1:1.10	1:1.10	1:1.25	1:1.27	1:1.27	1:1.25	1:1.25	1:1.09	1:1.24	1:1.09	1:1.09	1:1.09
Batch Capacity		10-15	14-16	15-20	25-35	30-50	50-60	90-120	165	165	350	350	350
Motor Power		18.5	22	30	40	55	110	160	185	250	280	315	355
Max. Nip(mm)		8	8	10	10	10	15	15	15	15	15	15	15
Overall dimension(mm)	L	3220	3570	3920	4380	5050	6040	6750	7040	7465	7650	8560	8680
	W	1500	1400	1650	1710	1920	2100	3040	3660	3660	3200	2970	3575
	H	1290	1350	1725	1880	1870	1625	1743	2080	2080	2860	1970	3020
Weight(ton)		3.8	4.5	6	8	13	22	35	45	45	50	58	68

Pre-Owned 50L Banbury Mixer – Dalian Huahan 2012

width="107" /><col width="152" /><td>80<td>100</tr>

Model		VAT(M) - 50/ 40	VAT(M) - 75/ 40	VAT(M) - 110/ 40	VAT(M) - 140/ 40	VAT(M) - 160/ 40	VAT(M) - 190/ 40	VAT(M) - 250/ 40	VAT(M) - 270/ 40
Total volume of mixing chamber (L)		50	75	110	140	160	190	250	270
Working volume of mixing chamber (L)		35	50	120	140	190</td><td>205
Speed of rear rotor (r/min)		40	40(6-60)	40(4-40)	40	40(6-60)	40(6-60)	20/40(4-40,6-60)	20/40(4-40,6-60)
Rotor speed ratio		1.167	1.185	1.156	1.15	1:1.143/1:1	1:1.143/1:1	1.2:1/1:1</td>	1:1.7/1:1
Compressed air pressure (mpa)		0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8
Cooling water pressure (mpa)		0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4
Main motor power (KW)		75	160/315	220/400	315	355/500/750	800/1100	1120/1250/1500	1100/1250/1500
Overall dimension (mm)	(L)	5095	5600	5690	6525	6760	7000	7500	8690
	(W)	1950	2300	2745	2800	2900	3330	4305	4325
	(H)	3180	4600	4670	5280	5280	6200	5768	6140
Weight (T)		11	16..8	28	33	38	46	48.5	51

Add to wishlist

Quick view