Shop - Page 35 of 40 - VatsnTecnic

Showing 409–420 of 472 results

Rubber Refiner with Bushes & 100HP Gearbox Sale

Secondhand Old Rubber Refiner with Bushes & 100HP Gearbox

Working diameter of rolls(mm)	φ400front roller φ480rear roller	φ450front roller φ510rear roller	φ480front roller φ610rear roller
Roll casting process	centrifugal composite casting	centrifugal composite casting	centrifugal composite casting
Roll cooling mode	Around the borehole cooling	Around the borehole cooling	Around the borehole cooling
The surface of the roll material	High nickel chromium molybdenum alloy	High nickel chromium molybdenum alloy	High nickel chromium molybdenum alloy
Working length of the roll(mm)	650	800/1000	800/1000/1200
After the roller line speed(m/min)	32.94(optional)	49/55.2/63.4(optional)	57.5-75.1(optional)
Front and rear roller line speed ratio	1.27-1.815(optional)	1.38/1.82/2(optional)	1.27-1.815(optional)
Production capacity(kg/h)	300	360	500-800
Motor power(kw)	55	55	75/90
Roller spacing adjustment range(mm)	0.1-15	0.1-15	0.1-15
Reducer	ZSY hard-tooth face gear	ZSY hard-tooth face gear	ZSY hard-tooth face gear
Bearing type	the double spherical roller bearing	the double spherical roller bearing	the double spherical roller bearing
Dimensions of LxWxH(mm)	4750x2300x1835	4060x2200x1470	5070x2800x1978
Quality(kg）	about 10500	about 12800	about 20000

Secondhand Rubber Cracker Mill 18x18x24 for Sale

Model		VAT-360	VAT-400	VAT-450	VAT-550	VAT-560	VAT-660	VAT-710
Diameter of rolls(mm)		360	400	450	550	560-510	660	710
Working length of rolls(mm)		900	1000	1200	1500	1530	2130	2200
Linear speed of front roll(r/min)		16.25	18.65	21.8	22.5	27.2	28	31.9
Speed ratio of front & rear roll		01:01.3	01:01.3	01:01.3	01:01.2	01:01.2	01:01.2	01:01.5
Max roll gap(mm)		10	10	15	16	15	15	15
Feeding capacity per batch(kg)		20-25	18-35	50	50-65	50-65	165	190
Driving motor power(kw)		30	45	55	110	90	240	280
Bearing body structure		Roller bearing with grease/thin oil lubrication+square type reducer
Overall dimension(mm)	L	4200	4920	5405	6646	6270	7280	8185
	W	1780	1780	1740	2736	2282	3400	3910
	H	1760	1800	1790	2105	2000	2530	2270
Weight(ton)		6.5	7.5	12	22	22.5	49	51

Secondhand Rubber Dispersion Kneader 35 Ltr | Make: Manjeet

Model		VAT-3/40	VAT-10/40	VAT-20/40	VAT-35/30	VAT-55/30	VAT-75/30	VAT-110/30
Total volume of mixing chamber (L)		8	25	45	75	125	170	250
Working volume of mixing chamber (L)		3	10	20	35	55	75	110
Speed of rotor (front/rear) (r/min)		40/31	40/31	40/31	30/24.5	30/24.5	30/24.5	30/25
Compressed air pressure (mpa)		0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8
Cooling water pressure (mpa)		0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4
Main motor power (kw)		7.5	22	37	55	75	110	185
Turning motor power (kw)		0.55	1.1	1.5	1.5	2.2	4	4
Turning angle (°)		140	140	140	140	140	140	140
Overall dimension (mm)	(L)	1670	2300	2360	3240	3400	3860	4225
	(W)	950	1350	1750	2080	2300	2300	1980
	(H)	1880	2120	2430	2650	3100	3375	3180
Weight (T)		1.2	2.3	4.5	6.5	7.5	10	11

Secondhand Rubber Extruder Imported 75 mm

MODEL		Vatsn-1	Vatsn-2	Vatsn-3	Vatsn-4	Vatsn-5	Vatsn-6	Vatsn-8	Vatsn-9
Scroll Size	Inches	2	3	4	4.5	5	6	8	10
Scroll Size	m.m.	50	75	100	115	125	150	200	250
Scroll Speed	RPM	38	38	38	38	38	38	38	38
L/D Ratio		4:1 TO 6:1
Motor	H.P	7.5	10	15	20	25	40	60	100
Reduction Gear Ratio		25:01:00	25:01:00	25:01:00	25:01:00	25:01:00	25:01:00	25:01:00	25:01:00
Feed Roller		Not Available		Optional
Extruder Head		Standard Adaptors other heads as per customer requirement(optional)
Barrel Heating/Cooling		Jacketed type in single zone for efficient heating /cooling
Water Cooling Requirement	LPM	10	15	20	30	40	80	150	180

Secondhand Rubber Hose Manufacturing Machines

Rubber Hose Manufacturing Machines are very significant in producing quality rubber hoses that the automobile industry, construction industries, etc require.

Secondhand Rubber Mixing Mill 10X24

Model		VAT-250	VAT-300	VAT-360	VAT-400	VAT-450	VAT-550	VAT-560	VAT-610	VAT-660	VAT-660(R)	VAT-710	VAT-760	VAT-810
Diameter of rolls(mm)		250	300	360	400	450	550	560	610	660	660	710	760	810
Working length of rolls(mm)		620	760	900	1000	1200	1530	1530	1830	2130	2130	2200	2540	2540
Linear speed of front roll(m/min)		15.2	14.5	16.26	18.65	23.85	27.18	27.61	28.7	32.45	28.6	31.9	33.23	31.9
Roll Friction Ratio		1:1.10	1:1.10	1:1.25	1:1.27	1:1.27	1:1.25	1:1.25	1:1.25	1:1.09	1:1.24	1:1.09	1:1.09	1:1.09
Batch Capacity		10-15	14-16	15-20	25-35	30-50	50-60	50-60	90-120	165	165	350	350	350
Motor Power		18.5	22	30	40	55	110	110	160	185	250	280	315	355
Max. Nip(mm)		8	8	10	10	10	15	15	15	15	15	15	15	15
Overall dimension(mm)	L	3220	3570	3920	4380	5050	6040	6040	6750	7040	7465	7650	8560	8680
	W	1500	1400	1650	1710	1920	2100	2100	3040	3660	3660	3200	2970	3575
	H	1290	1350	1725	1880	1870	1625	1625	1743	2080	2080	2860	1970	3020
Weight(ton)		3.8	4.5	6	8	13	22	22	35	45	45	50	58	68

Secondhand Sidewall Conveyor Belt (1.2×1.8m, 1.4×1.8m)

Technical parameters	BD240-1200-1500	BD240-1200-2000	BD400-1400-1500	BD400-1400-2000	BD630-2200-2000	BD630-2400-2500
Platen Size(mm)	1200x1500x70	1200x2000x70	1400x1500x70	1400x2000x70	2200x2000x80	2400x2500x80
Unit Pressure	2.0MPa	2.0MPa	2.0MPa	2.0MPa	2.0MPa	2.0MPa
Cylinder City	4	6	4	6	6	8
Active Roller Diameter(mm)	630	630	800	800	800	1000
Clear Effective Width(mm)	250-750	250-750	410-830	410-830	410-830	650-1750
Passive Roller Diameter(mm)	630	630	800	800	800	1000

Secondhand Tire Building Machines (15-20 inch & 24-36 inch)

Model / Specification	PR2-1215	MC2-1519
Applicable Tyre	PCR (steel, fabric)	MC (fabric)
Bead Diameter	12″ ~ 15″	15″ ~ 19″ s
Belt Drum Dia	Ø445.6 ~ Ø 573	Ø525 ~ Ø 652.5
Belt Drum Dia	Ø573 ~ Ø700	Ø652.5 ~ Ø779.8
Transfer Ring Inner Dia. Range	Ø450 ~ Ø 700	Ø525 ~ Ø 870
Belt Drum Width	300mm	300mm
Height of Drum center above Floor	1060mm	1060mm
Width of Transfer Ring Segment	200mm	200mm
Shaping Drum Range	Min190 ~ MAX560mm (Shaping Drum)	Min190 ~ MAX560mm (Shaping Drum)
Shaping Drum Range	Min100 ~ MAX560mm (Shoulder Ring)	Min100 ~ MAX560mm (Shoulder Ring)
Feeding Mechanism	Cart Type / Hanging Type	Cart Type / Hanging Type
Width of JLB (slit cap ply)	8mm to 12mm	8mm to 12mm
Tread Width Range	300mm	300mm
Tread Length MAX.	2500mm	2500mm
Electronic Control System	Servo motor CONTROL Manual / Auto	Servo motor CONTROL Manual / Auto
Building rate (approximate)	90 sec / pc	90 sec / pc

Secondhand Vulcanizing Hydraulic Press

MODEL NO.	VAT-75	VAT-100	VAT-150	VAT-200	VAT-250	VAT-300	VAT-350	VAT-400	VAT-500
PLATEN SIZE (MM)	360x360	410x410	460x460	510x510	610x610	660x660	760x760	800x850	1000x1000
MACHINE TONNAGE	75	100	150	200	250	300	350	400	500
RAM SIZE DIA (MM)	220 MM	250 MM	300 MM	350 MM	400 MM	450 MM	500 MM	550 MM	600 MM
DAYLITE GAP	500 MM	500 MM	500 MM	400-500 MM	400-500 MM	400-500 MM	400-500 MM	500-800 MM	500-900 MM
MAN MOTOR	5 HP	5 HP	5 HP	7.5 HP	10 HP	10 HP	15 HP	15 HP	20 HP
MAIN RAM STROKE	500 MM	500 MM	500 MM	500 MM	500 MM	500 MM	500 MM	500 MM	500 MM

Secondhand Vulcanizing Rubber Rotocure Machine – Best Price

Model		VAT-710X700	VAT-710X1450	VAT-1000X1600	VAT-1250X1800	VAT-1500X2400	VAT-2000X3200	VAT-2500X4200
Drum diameter (mm)		710	710	1000	1250	1500	2000	2500
Max. Product width (mm)		500	1150	1300	1500	2100	2900	3800
Product thickness (mm)		0.5-5	0.5-5	1-8	1-8	1-10	1-10	1-10
Total pulling force of steel belt (kn)		300	380	900	1100	1500	3300	5000
Drum liner speed (m/min)		0.2-2	0.2-2	0.2-2	0.2-2	0.2-3	0.2-3	0.2-3
Curing pressure (mpa)		0.5-3.8	0.5-3.8	0.5-3.8	0.5-3.8	0.5-3.8	0.5-3.8	0.5-3.8
Steam pressure (mpa)		≤1	≤1	≤1	≤1	≤1	≤1	≤1
Main motor power (kw)		2.2	3	3	3	5.5	7.5	11
Winding power (kw)		0.37	0.37	0.37	0.75	0.75	1.5	1.5
Overall dimension (mm)	(L)	2630	2630	3300	5790	6300	7200	8800
	(W)	2440	3190	3300	4870	4900	7100	8400
	(H)	2730	2730	3500	4970	5100	5800	6200
Weight (t)		15	20	25	28	32	100	200

Top Quality 22×60 Used Rubber Mixing Mill – Great Price Offer

Model		VAT-250	VAT-300	VAT-360	VAT-400	VAT-450	VAT-550	VAT-610	VAT-660	VAT-660(R)	VAT-710	VAT-760	VAT-810
Diameter of rolls(mm)		250	300	360	400	450	550	610	660	660	710	760	810
Working length of rolls(mm)		620	760	900	1000	1200	1530	1830	2130	2130	2200	2540	2540
Linear speed of front roll(m/min)		15.2	14.5	16.26	18.65	23.85	27.18	28.7	32.45	28.6	31.9	33.23	31.9
Roll Friction Ratio		1:1.10	1:1.10	1:1.25	1:1.27	1:1.27	1:1.25	1:1.25	1:1.09	1:1.24	1:1.09	1:1.09	1:1.09
Batch Capacity		10-15	14-16	15-20	25-35	30-50	50-60	90-120	165	165	350	350	350
Motor Power		18.5	22	30	40	55	110	160	185	250	280	315	355
Max. Nip(mm)		8	8	10	10	10	15	15	15	15	15	15	15
Overall dimension(mm)	L	3220	3570	3920	4380	5050	6040	6750	7040	7465	7650	8560	8680
	W	1500	1400	1650	1710	1920	2100	3040	3660	3660	3200	2970	3575
	H	1290	1350	1725	1880	1870	1625	1743	2080	2080	2860	1970	3020
Weight(ton)		3.8	4.5	6	8	13	22	35	45	45	50	58	68

Unused Rubber Refiner Mill 480×610×800 | 2015 Make | 10 Ton

Working diameter of rolls(mm)	φ400front roller φ480rear roller	φ450front roller φ510rear roller	φ480front roller φ610rear roller
Roll casting process	centrifugal composite casting	centrifugal composite casting	centrifugal composite casting
Roll cooling mode	Around the borehole cooling	Around the borehole cooling	Around the borehole cooling
The surface of the roll material	High nickel chromium molybdenum alloy	High nickel chromium molybdenum alloy	High nickel chromium molybdenum alloy
Working length of the roll(mm)	650	800/1000	800/1000/1200
After the roller line speed(m/min)	32.94(optional)	49/55.2/63.4(optional)	57.5-75.1(optional)
Front and rear roller line speed ratio	1.27-1.815(optional)	1.38/1.82/2(optional)	1.27-1.815(optional)
Production capacity(kg/h)	300	360	500-800
Motor power(kw)	55	55	75/90
Roller spacing adjustment range(mm)	0.1-15	0.1-15	0.1-15
Reducer	ZSY hard-tooth face gear	ZSY hard-tooth face gear	ZSY hard-tooth face gear
Bearing type	the double spherical roller bearing	the double spherical roller bearing	the double spherical roller bearing
Dimensions of LxWxH(mm)	4750x2300x1835	4060x2200x1470	5070x2800x1978
Quality(kg）	about 10500	about 12800	about 20000

Add to wishlist

Quick view