Used 84-Inch DXS Rubber Mixing Mill, 2013 For Sale

This 84 inch mixing mill is a used DXS rubber mixing mill manufactured in 2013 and offered for industrial enquiry. The machine is listed as running, giving buyers an opportunity to review a substantial two-roll platform for rubber processing before making a purchase decision.

84 inch mixing mill overview

An open rubber mixing mill uses two counter-rotating rolls to masticate, blend, plasticise, and refine rubber compounds. Operators feed material into the roll nip, adjust the working gap, and work the batch until it reaches the required consistency. The rolls can then help form a sheet or prepare the compound for a later manufacturing stage.

The stated machine size is 84 inch, with DXS identified as the make and 2013 as the manufacturing year. The available information does not state roll diameter, roll face length, motor rating, roll speed, temperature-control arrangement, machine weight, or electrical details. Buyers should therefore request the complete nameplate and technical record from Vatsn Tecnic before planning installation.

Stated machine details

The machine condition is used and the current machine status is running. Brand and model are Available on Request where a separate brand or model reference is required. The supplied information also mentions China as the machine location, while the catalogue country is India; confirm the physical location, ownership, inspection access, and dispatch terms before purchase.

The photographs show a large blue open mill assembly with drive motors, gearboxes, roll supports, guards, shafts, and an overhead stock-blender or handling assembly. These photographs are provided as a visual reference for the actual equipment. They do not, by themselves, verify capacity, working speed, motor power, safety compliance, or the inclusion of every visible component.

Industrial uses for a large rubber mixing mill

A two-roll mill may support rubber mastication, compounding, colour dispersion, reclaim rubber preparation, and sheet formation. Depending on the formulation and downstream process, manufacturers may evaluate this type of machine for seals and gaskets, hoses, belts, mats, profiles, rollers, footwear components, and other molded-rubber products.

In addition, a large working platform may suit production batches where the buyer needs a heavy-duty open mill rather than a small laboratory unit. It can also support development work, rework, recipe adjustment, and the preparation of compounds for calendering, extrusion, molding, or vulcanisation. Actual output depends on the recipe, batch weight, roll gap, roll temperature, operator method, and supporting equipment, so buyers should validate the intended process with their technical team.

Benefits of buying a used running machine

A used running DXS rubber mixing mill can reduce the initial investment compared with a new machine and may provide a faster route to additional mixing capacity. Because the machine is stated to be running, a buyer can request a live demonstration and observe motor response, roll rotation, gearbox behaviour, bearing noise, lubrication points, controls, and emergency-stop operation.

Used equipment can be practical for factories, MSMEs, entrepreneurs, and established rubber manufacturers that want to allocate capital across machinery, utilities, tooling, raw materials, and installation. However, the total project budget should also consider dismantling, lifting, transport, foundation work, electrical connection, guarding, service, spare parts, and commissioning.

Inspection and operational verification

Arrange an on-site inspection or live running test before committing to the purchase. Check that both rolls start, stop, and rotate smoothly in the intended direction. Inspect the roll surfaces for scoring, pitting, cracks, corrosion, or excessive wear, and confirm that the nip adjustment operates across the required range.

Also examine the motors, gearboxes, couplings, shafts, bearings, seals, frame, base, guards, lubrication system, and control panel. Confirm the operation of emergency stops, electrical isolators, interlocks, and operator controls. Ask for maintenance records, service history, manuals, spare parts, drawings, and a list of included accessories.

Before arranging removal, verify overall dimensions, machine weight, power supply, roll speed, cooling or heating provisions, loading access, lifting points, and the transport route. Request clear confirmation of the 84 inch size, DXS make, 2013 year, running status, and current location. Where a specification is unavailable, Vatsn Tecnic can help coordinate clarification with the seller.

Why contact Vatsn Tecnic?

Vatsn Tecnic works with industrial buyers, factory owners, manufacturers, business owners, MSMEs, and entrepreneurs seeking rubber machinery options. You can review the Vatsn Tecnic website for additional machinery information. You can also use the Vatsn Tecnic IndiaMART profile as another enquiry channel.

The team can share additional photographs, clarify the available machine record, and discuss inspection, loading, and delivery arrangements. As a result, buyers can compare the mill with their compound, batch size, floor space, utilities, production targets, and maintenance capability before arranging payment or removal.

Request price and availability

This used and running 84 inch DXS rubber mixing mill is offered for industrial enquiry, with price and final commercial terms available on request. When contacting Vatsn Tecnic, mention the 2013 DXS machine, required delivery location, intended application, and preferred inspection date.

Finally, request written confirmation of the current running status, included components, documentation, dismantling scope, loading responsibility, and dispatch timeline. A clear technical discussion helps your production and maintenance teams plan installation and make a confident buying decision.