Compression Moldingrubber processing machine
Buy | Sell Used Uni-type 125 Hp Two Roll Rubber Mixing Mill Machine
| Parameter/Model | VAT-2-250 | VAT-2-360 | VAT-2-400 | VAT-2-450 | VAT-2-560 | VAT-2-610 | VAT-2-810 | |
| Roll Diameter (mm) | 250 | 360 | 400 | 450 | 560 | 610 | 810 | |
| Roll Working Length (mm) | 720 | 1120 | 1200 | 1400 | 1650 | 1730 | 2130 | |
| Ratio of Rubber Speed | 1:1 | 1:1 | 1:1 | 1:1 | 1:1 | 1:1 | 1:1 | |
| Roll Speed (m/min) | 1.2-12 | 3-20.2 | 4-23 | 2.5-24.8 | 2-18.7 | 4-36 | 2-20 | |
| Nip Adjust Range (mm) | 0-6 | 0-10 | 0-10 | 0-10 | 0-15 | 0.5-25 | 0.2-25 | |
| Motor Power (kw) | 15 | 37 | 45 | 55 | 75 | 90 | 160 | |
| Size (mm) | Length | 3950 | 5400 | 5600 | 7013 | 7200 | 7987 | 8690 |
| Width | 1110 | 1542 | 1400 | 1595 | 1760 | 1860 | 3139 | |
| Height | 1590 | 1681 | 2450 | 2460 | 2760 | 2988 | 4270 | |
| Weight (KG) | 5000 | 11500 | 12500 | 14000 | 24000 | 30000 | 62000 | |
Buy | Sell Used Pin Cold Feed Rubber Extruder Line 90 mm
| MODEL | Vatsn-1 | Vatsn-2 | Vatsn-3 | Vatsn-4 | Vatsn-5 | Vatsn-6 | Vatsn-8 | Vatsn-9 | |
| Scroll Size | Inches | 2 | 3 | 4 | 4.5 | 5 | 6 | 8 | 10 |
| m.m. | 50 | 75 | 100 | 115 | 125 | 150 | 200 | 250 | |
| Scroll Speed | RPM | 38 | 38 | 38 | 38 | 38 | 38 | 38 | 38 |
| L/D Ratio | 4:1 TO 6:1 | ||||||||
| Motor | H.P | 7.5 | 10 | 15 | 20 | 25 | 40 | 60 | 100 |
| Reduction Gear Ratio | 25:01:00 | 25:01:00 | 25:01:00 | 25:01:00 | 25:01:00 | 25:01:00 | 25:01:00 | 25:01:00 | |
| Feed Roller | Not Available | Optional | |||||||
| Extruder Head | Standard Adaptors other heads as per customer requirement(optional) | ||||||||
| Barrel Heating/Cooling | Jacketed type in single zone for efficient heating /cooling | ||||||||
| Water Cooling Requirement | LPM | 10 | 15 | 20 | 30 | 40 | 80 | 150 | 180 |
Reconditioned Hydraulic Press 20 Ton (80×120 Inch) – Complete Machine
| MODEL NO. | VAT-75 | VAT-100 | VAT-150 | VAT-200 | VAT-250 | VAT-300 | VAT-350 | VAT-400 | VAT-500 |
| PLATEN SIZE (MM) | 360x360 | 410x410 | 460x460 | 510x510 | 610x610 | 660x660 | 760x760 | 800x850 | 1000x1000 |
| MACHINE TONNAGE | 75 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 500 |
| RAM SIZE DIA (MM) | 220 MM | 250 MM | 300 MM | 350 MM | 400 MM | 450 MM | 500 MM | 550 MM | 600 MM |
| DAYLITE GAP | 500 MM | 500 MM | 500 MM | 400-500 MM | 400-500 MM | 400-500 MM | 400-500 MM | 500-800 MM | 500-900 MM |
| MAN MOTOR | 5 HP | 5 HP | 5 HP | 7.5 HP | 10 HP | 10 HP | 15 HP | 15 HP | 20 HP |
| MAIN RAM STROKE | 500 MM | 500 MM | 500 MM | 500 MM | 500 MM | 500 MM | 500 MM | 500 MM | 500 MM |
Resale 4 roll calender machine 610×2030 | Taiwan | 2012 Model
| Parameter/model | VAT-4-230 | VAT-4-360 | VAT-4-400 | VAT-4-450 | VAT-4-550 | VAT-4-610 | VAT-4-810 | ||
| Roll diameter (mm) | 230 | 360 | 400 | 450 | 550 | 610 | 810 | ||
| Roll working length (mm) | 630 | 1120 | 1200 | 1400 | 1500 | 1730 | 2500 | ||
| Ratio of rubber speed | 1:1:1:1 | 0.7:1:1:0.7 | 1:1.4:1.4:1 | 1:1.5:1.5:1 | 1:1.5:1.5:1 | 1:1.4:1.4:1 | 1:1.4:1.4:1 | ||
| Roll speed (m/min) | 2.1-21 | 2-20.1 | 3-26 | 2.5-25 | 3-30 | 8-50 | 4-40 | ||
| Nip adjust range (mm) | 0-10 | 0-10 | 0-10 | 0-10 | 0-15 | 0-10 | 0-10 | ||
| Motor power (KW) | 15 | 55 | 75 | 110 | 160 | 185 | 132x4 | ||
| Size (mm) | Length | 2800 | 3300 | 6400 | 6620 | 7550 | 7880 | 11400 | |
| Width | 930 | 1040 | 1620 | 1970 | 2400 | 2560 | 3900 | ||
| Height | 1890 | 2350 | 2490 | 2740 | 3400 | 3920 | 5140 | ||
| Weight (KG) | 5000 | 16000 | 20000 | 23000 | 45000 | 50000 | 130000 | ||
Reused 75L Banbury Mixer | Heavy-Duty Rubber Internal Mixer
| Model | VAT(M) - 50/ 40 | VAT(M) - 75/ 40 | VAT(M) - 110/ 40 | VAT(M) - 140/ 40 | VAT(M) - 160/ 40 | VAT(M) - 190/ 40 | VAT(M) - 250/ 40 | VAT(M) - 270/ 40 | |
| Total volume of mixing chamber (L) | 50 | 75 | 110 | 140 | 160 | 190 | 250 | 270 | |
| Working volume of mixing chamber (L) | 35 | 50 | 80 | 100 | 120 | 140 | 190 | 205 | |
| Speed of rear rotor (r/min) | 40 | 40(6-60) | 40(4-40) | 40 | 40(6-60) | 40(6-60) | 20/40(4-40,6-60) | 20/40(4-40,6-60) | |
| Rotor speed ratio | 1.167 | 1.185 | 1.156 | 1.15 | 1:1.143/1:1 | 1:1.143/1:1 | 1.2:1/1:1 | 1:1.7/1:1 | |
| Compressed air pressure (mpa) | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | |
| Cooling water pressure (mpa) | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | |
| Main motor power (KW) | 75 | 160/315 | 220/400 | 315 | 355/500/750 | 800/1100 | 1120/1250/1500 | 1100/1250/1500 | |
|
Overall dimension (mm) |
(L) | 5095 | 5600 | 5690 | 6525 | 6760 | 7000 | 7500 | 8690 |
| (W) | 1950 | 2300 | 2745 | 2800 | 2900 | 3330 | 4305 | 4325 | |
| (H) | 3180 | 4600 | 4670 | 5280 | 5280 | 6200 | 5768 | 6140 | |
| Weight (T) | 11 | 16..8 | 28 | 33 | 38 | 46 | 48.5 | 51 | |
Reused Uni-Stage Automated Tire Building Machine 14”–18” TBM
| Model / Specification | PR2-1215 | MC2-1519 |
| Applicable Tyre | PCR (steel, fabric) | MC (fabric) |
| Bead Diameter | 12" ~ 15" | 15" ~ 19" s |
|
Belt Drum Dia |
Ø445.6 ~ Ø 573 | Ø525 ~ Ø 652.5 |
| Ø573 ~ Ø700 | Ø652.5 ~ Ø779.8 | |
| Transfer Ring Inner Dia. Range | Ø450 ~ Ø 700 | Ø525 ~ Ø 870 |
| Belt Drum Width | 300mm | 300mm |
| Height of Drum center above Floor | 1060mm | 1060mm |
| Width of Transfer Ring Segment | 200mm | 200mm |
|
Shaping Drum Range |
Min190 ~ MAX560mm (Shaping Drum) | Min190 ~ MAX560mm (Shaping Drum) |
| Min100 ~ MAX560mm (Shoulder Ring) | Min100 ~ MAX560mm (Shoulder Ring) | |
| Feeding Mechanism | Cart Type / Hanging Type | Cart Type / Hanging Type |
| Width of JLB (slit cap ply) | 8mm to 12mm | 8mm to 12mm |
| Tread Width Range | 300mm | 300mm |
| Tread Length MAX. | 2500mm | 2500mm |
| Electronic Control System | Servo motor CONTROL Manual / Auto | Servo motor CONTROL Manual / Auto |
| Building rate (approximate) | 90 sec / pc | 90 sec / pc |
Used 3 Roll Rubber Calender Uni Bearing Type 400×1400 mm
| Parameter/model | VAT-3-250 | VAT-3-360 | VAT-3-400 | VAT-3-450 | VAT-3-560 | VAT-3-610 | VAT-3-810 | ||
| Roll diameter (mm) | 250 | 360 | 400 | 450 | 560 | 610 | 810 | ||
| Roll working length (mm) | 720 | 1120 | 1200 | 1400 | 1650 | 1730 | 2130 | ||
| Ratio of rubber speed | 1:1 | 1:1 | 1:1 | 1:1.5:1 | 1:1.5:1 | 1:1.4:1 | 1:01:01 | ||
| Roll speed (m/min) | 2-15.9 | 3-20 | 3-26 | 2.6-26.2 | 3-30 | 5.4-54 | 3-30 | ||
| Nip adjust range (mm) | 0-6 | 0-10 | 0-10 | 0-10 | 0-15 | 0.5-25 | 0.2-25 | ||
| Motor power (KW) | 22 | 45 | 55 | 75 | 110 | 160 | 132x3 | ||
| Size (mm) | Length | 3950 | 5400 | 5600 | 7013 | 7200 | 7987 | 8690 | |
| Width | 1110 | 1542 | 1400 | 1595 | 1760 | 1860 | 3139 | ||
| Height | 1810 | 2440 | 2520 | 2900 | 3800 | 3950 | 5050 | ||
| Weight (KG) | 5500 | 14000 | 18000 | 21000 | 35000 | 42000 | 110000 | ||